Cisco Cisco Unified MeetingPlace Audio Server Maintenance Manual
4-66
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8106)
78-16411-01
Chapter 4 Configuring the 8106 Server
Configuring the system
Figure 4-71 Setting IP Address for 96 T1 CAS and 240 IP Ports
Step 7
Type the correct slot number for the blade you want to modify and press Enter. In this configuration, it
is slot 6 so type
is slot 6 so type
6
and press Enter.
Step 8
Step 9
Enter the correct IP address and continue pressing Enter until you are prompted with the “blade”
configuration menu.
configuration menu.
Step 10
Type
2
and press Enter to modify a blade. A prompt for the blade slot to modify appears, as shown in
Step 11
Type the correct slot number for the blade you want to modify and press Enter. In this configuration, it
is slot 5 so type
is slot 5 so type
5
and press Enter.
Note
shows slot 6 but you have already configured slot 6, so you should select slot 5 now.
Step 12
Step 13
Enter the correct IP address and continue pressing Enter until you are prompted with the “blade”
configuration menu.
configuration menu.
***** B L A D E C O N F I G M E N U *****
1) View blade details
2) Modify blade
x) Exit program
Enter command: 2
Enter blade slot [1..6]: 6
Type [IP]:
Card Type [TP1610-4]:
Port Group [ 3]:
Number of Ports [120]:
1st Port [ 23]:
IP address [0] [0.0.0.0]: 10.10.10.10
Subnet Mask [0.0.0.0]: 255.255.255.0
Default Gateway [0.0.0.0]: 10.10.10.1
Base UDP Port [0] [ 5000]:
Jitter Buffer Minimum Size [ 100]:
Jitter Buffer Optimization [ 7]:
IP Precedence [0]:
Type of Service (TOS) [ 0]:
DSCP / DiffServ [unused]:
RTCP Interval [default]: