Cisco Cisco Unified MeetingPlace Audio Server Maintenance Manual
4-19
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8106)
78-16411-01
Chapter 4 Configuring the 8106 Server
Configuring the system
Figure 4-20 Logging into the CLI
Configuring the system
This section describes the details for using your laptop to configure the MeetingPlace server. It covers
instructions for configuring:
instructions for configuring:
•
LAN parameters via the “net” command
•
time zone via the “timezone” command
•
T1 Smart Blades, Multi Access Blades, and Smart Blades via the “blade” command
•
date and time via the “date” command
Configuring the LAN parameters
The LAN parameters identify the MeetingPlace server on the customer’s TCP/IP network. The site
contact supplies the LAN parameters via the MeetingPlace Audio Server 5.2 Installation Planning Guide
worksheet 3-3. To configure the LAN parameters, follow this procedure.
contact supplies the LAN parameters via the MeetingPlace Audio Server 5.2 Installation Planning Guide
worksheet 3-3. To configure the LAN parameters, follow this procedure.
Step 1
If you do not already have terminal logging turned on, turn it on before proceeding. For information on
logging, see the
logging, see the
.
Step 2
Type
getether
and press Enter. The Ethernet address of the MeetingPlace server appears as in
. (For more information about the “getether” command, see
.)
Figure 4-21 getether Command
user name: tech
Password:
Last login: Wed Oct 29 11:51:12 from lager
************************************************************
* MeetingPlace(tm) *
* by Latitude Communications *
* *
* Copyright (c) 1993-2004 Latitude Communications, Inc. *
* All rights reserved. *
************************************************************
Conference server 5.2.0 S/N: not set
Wed Oct 29 14:55:03 PST 2003
meetingplace:tech$
meetingplace:tech$ getether
0001af03c05e