Cisco Cisco Unified MeetingPlace Audio Server Maintenance Manual
4-20
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8106)
78-16411-01
Chapter 4 Configuring the 8106 Server
Configuring the system
Step 3
Record the Ethernet address for future use.
Step 4
At the tech$ prompt, type
net
and press Enter. “” on page <$chapnum20 appears. (For more information
about the “net” command, see
.)
Figure 4-22 net Command Menu
Step 5
Type
2
appears.
Figure 4-23 net Command Modify Menu
Step 6
Select
3
,
4
,
5
,
6
, and
7
in order and follow the prompts to enter values using the MeetingPlace Audio
Server 5.2 Installation Planning Guide worksheet 3-3.
See
for the details of each parameter.
meetingplace:tech$ net
1) View the server & site configuration
2) Modify the server configuration
3) Select another server (current unit = #0)
99) Quit
Select:
Select: 2
1) View the current configuration
2) Select a different site for this server
3) Change the host and site names
4) Change server IP address and Ethernet address
5) Change site subnet mask or broadcast addr
6) Change site routing information
7) Change network time protocol servers
99) Return to the main menu
Table 4-2
8106 Server Configuration Parameters
Parameter
Explanation
Active
System status, non-editable.
Description
Designates three names:
Host name — The DNS name tied to the server’s IP address.
Host description
— The name of the server as seen in
MeetingTime and MeetingPlace Web. It is helpful to use
MeetingPlace in this field since it can be different from the TCP/IP
name.
MeetingPlace in this field since it can be different from the TCP/IP
name.
Site name — An arbitrary name for the location of the server.