Cisco Cisco Unified MeetingPlace Audio Server Maintenance Manual
4-41
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8106)
78-16411-01
Chapter 4 Configuring the 8106 Server
Configuring the system
Step 1
If you do not already have terminal logging turned on, turn it on before proceeding. For information on
logging, see the
logging, see the
.
Step 2
At the tech$ prompt, type
e1span
and press Enter.
appears. (For more information about
the “e1span” command, see the
.)
Signaling protocol
wink start
Specifies the signaling protocol.
•
loop start
•
wink start
•
ground start
•
clear channel
•
E1
•
IP
•
protocol table
Protocol table
0
Specifies the number of the
protocol table to copy from.
protocol table to copy from.
•
number from 0 to 99
Number of DID digits
expected
expected
0
Specifies the number of DID
digits.
digits.
•
number from 0 to 6
Default access type
combined access
Specifies the access type
•
Combined access
•
DID meeting
•
Profile
•
MeetingNotes
•
loop through
transfer
transfer
•
EBSApp1004
•
EBSApp1005
•
EBSApp1007
•
EBS Xfer test
•
NewApp1011
•
Choose music
•
Spanish samples
•
Goto123123_1015
Language
English (US)
Specifies which language to use.
•
English (US)
•
English (UK)
•
no language
Human assistance?
n
Specifies if human assistance is
allowed.
allowed.
•
y = yes
•
n = no
Flash transfer?
n
Specifies if this can be flash
transferred.
transferred.
•
y = yes
•
n = no
Outdial?
y
Specifies if this can be outdialed
on.
on.
•
y = yes
•
n = no
Table 4-7
Default T1 PRI Span Configuration (continued)
Parameter
Default
Explanation
Possible Values
X