Cisco Cisco Unified MeetingPlace Audio Server Maintenance Manual
4-42
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8106)
78-16411-01
Chapter 4 Configuring the 8106 Server
Configuring the system
Figure 4-46 e1span Command Menu
Step 3
Type
2
appears.
Figure 4-47 span Record Selection
Step 4
Type the number of the span record that needs to be modified and press Enter. In this example, span
record 0 is being configured so type
record 0 is being configured so type
0
and press Enter. The first five lines of
appear.
Figure 4-48 span Record Configuration
meetingplace:tech$ e1span
MeetingPlace is up
***** E 1 S P A N C O N F I G M E N U *****
1) View ACTI span record(s)
2) Modify ACTI span record
x) Exit program
Enter command:
Enter command: 2
Enter ACTI span record number [0..15] : 0
Enter command: 2
Enter DTI span record number [0..23] : 0
------------- UNIT 0 SPAN 0 --------------
--- To skip over a field, just press <cr> ---
Activate the DTI span? [y] :
Framing [ESF] : D4
Zero code suppression [ B8ZS] :
Timing [external] :
External sync priority [ 1] :
Trunk [ 1] [port 0] :
Trunk [ 2] [port 1] :
Trunk [ 3] [port 2] :
Trunk [22] [port 21] :
Trunk [23] [port 22] :
Trunk [24] [port 23] :
Remote loopback to network? [n] :
Internal data loopback? [n] :
Enter command: