Cisco Cisco Unified MeetingPlace Audio Server Maintenance Manual
9-12 Reservationless meetings
Cisco MeetingPlace Audio Server System Manager’s Guide
February 27, 2004
Enabling the system for RSNA
To enable the system to use the RSNA feature:
1.
In MeetingTime, select the
Configure
tab, and then select the
Usage
Parameters
view.
2.
Scroll to the
SNA Settings
attributes. For the
RSNA Enabled?
attribute, and
choose
Yes
.
3.
Click
Save Changes
.
Configuring users and groups for RSNA
To enable remote users to use the RSNA feature, you must set various
attributes in the MeetingPlace Configure tab.
attributes in the MeetingPlace Configure tab.
Each user is assigned to a specific server identified by the Scheduling Home
Server value in the user’s profile. This value is used to look up an Other
MeetingPlace Servers record (created in
Server value in the user’s profile. This value is used to look up an Other
MeetingPlace Servers record (created in
To configure user profiles or user groups:
1.
In MeetingTime, select the
Configure
tab.
2.
Select the
User Profile
or
User Group
view. For the
Scheduling home server
attribute (in the Identification attributes category), enter a number between
1 and 32767 that matches the ID Number value set in step 2 in
1 and 32767 that matches the ID Number value set in step 2 in
I
MPORTANT
This value must be the same as the ID Number value and
must not be 0 (zero). The range should start at 101, and not 1. For example,
1 to 32767 should instead be 101 to 32767.
1 to 32767 should instead be 101 to 32767.
3.
Click
Save Changes
.
N
OTES
•
In addition to these settings, make sure the following attributes are set as
follows:.
follows:.
Attribute
Value
RSNA Enabled? (in the
Configure tab, Usage
Parameters view)
Configure tab, Usage
Parameters view)
Yes
For more information, see
Will Accept SNA Transfers? (in
the Configure tab, Other
MeetingPlace Servers view)
the Configure tab, Other
MeetingPlace Servers view)
Yes
For more information, see