Cisco Cisco TelePresence Management Suite (TMS) Version 15
3. Click Create conference bridge.
4. Ensure that under
Conference bridges in this pool
the status of the conference bridge is listed as
Active.
5. Repeat the steps above for all the bridges you want to use for scheduled conferences.
Creating a conference bridge pool for non-scheduled
conferences
conferences
1. Log into the TelePresence Conductor as a user with administrator rights.
2. Go to
Conference Configuration > Conference bridges > Conference bridge pools
.
3. Click New.
4. In the Pool name field enter a name, for example: Non-scheduled MCUs.
5. Click Create pool.
Adding a conference bridge to the conference bridge pool for
non-scheduled conferences
non-scheduled conferences
1. Click Add conference bridge.
2. Enter the following in the relevant fields:
Name
A name for your conference bridge, for example: MCU for non-scheduled conferences.
IP address
or FQDN
or FQDN
The IP address or FQDN of the conference bridge.
Port
The port number the TelePresence Conductor will use to communicate with the conference
bridge:
bridge:
l
HTTP = 80
l
HTTPS = 443
Protocol
The protocol the TelePresence Conductor will use to communicate with the conference
bridge:
bridge:
l
HTTP
l
HTTPS
Conference
bridge
username
bridge
username
bridges.
Conference
bridge
Password
bridge
Password
The password for the username above.
Dial plan
prefix
prefix
The alpha-numeric prefix that has been defined as part of a Cisco VCS search rule to route
calls to this MCU.
calls to this MCU.
Dedicated
content
ports
content
ports
Enter the number of dedicated content ports for your MCU. This is found on the MCU under
Settings > Media ports
.
3. Click Create conference bridge.
Cisco TelePresence Conductor with Cisco TMS Deployment Guide
Page 8 of 21
Configuring the TelePresence Conductor