Cisco Cisco TelePresence Management Suite (TMS) Version 15 Maintenance Manual
Advanced Settings
Field
Description
Picture
mode
mode
■
Voice Switched: Only the participant who is talking will be seen, and if another participant starts
talking, the picture will switch to them.
talking, the picture will switch to them.
■
Continuous Presence: A split screen showing all participants equally.
■
Enhanced Continuous Presence: The participant who is speaking shows largest with the other
participants shown around the main picture.
participants shown around the main picture.
IP Band
width
width
IP Bandwidth is preset in
Administrative Tools > Configuration > Conference Settings > Conference
Create Options
section, Default Bandwidth field.
This bandwidth will be the default used in a scheduled conference but can be changed during book
ing.
ing.
Systems that have an upper limit lower than IP Bandwidth will connect using their maximum band
width.
width.
IP Bandwidth range is from 64kbps to 6144kbps.
Bandwidth restrictions put in place by call control infrastructure will override this setting.
Note:
This does not apply to CTS and TX systems - it is not possible to specifiy the bandwidth a CTS
or TX system uses in a call from Cisco TMS.
ISDN Band
width
width
ISDN Bandwidth is preset in
Administrative Tools > Configuration > Conference Settings > Con
ference Create Options
section, Default ISDN Bandwidth field.
This bandwidth will by default be used in a scheduled conference but can be changed during book
ing.
ing.
Systems that have an upper limit lower than ISDN Bandwidth, will connect using their maximum band
width.
width.
The first digits denote the number of b-channels. The second number is the bandwidth in kbps. The
range is from 64kbps to 4096kbps.
range is from 64kbps to 4096kbps.
Secure
If Secure is set to Yes, and the conference is hosted on a TelePresence Conductor or bridge, end
points can be scheduled in the conference whether they support encryption or not, as encryption will
be set as required on the TelePresence Conductor or bridge.
points can be scheduled in the conference whether they support encryption or not, as encryption will
be set as required on the TelePresence Conductor or bridge.
For point-to-point or multisite conferences, if Secure is set to Yes, Cisco TMS will only allow the con
ference to be booked if every leg of the call is secure. This includes checking whether the endpoint
supports secure signaling.
ference to be booked if every leg of the call is secure. This includes checking whether the endpoint
supports secure signaling.
Note:
If an endpoint that supports encryption has encryption set to Off and is added to a conference
which is encrypted, encryption will be set on the endpoint, and this setting will persist after the con
ference has ended, until set to Off on the endpoint itself.
ference has ended, until set to Off on the endpoint itself.
Table 97 Advanced settings when booking a new conference
145
Cisco TelePresence Management Suite Administrator Guide
Booking