Cisco Cisco TelePresence Management Suite (TMS) Version 15 Maintenance Manual
Field
Description
IP Address
IP Address for the system.
MAC
Address
Address
MAC address for the system.
Hostname
The hostname for the system.
Track sys-
tem on net-
work by
tem on net-
work by
Set the preferred address for your system. The options are:
■
IP Address
■
Hostname
System con-
nectivity
nectivity
Define the system's location on the network:
■
Inaccessible: The system cannot connect to Cisco TMS or vice versa. No attempts to communicate
will be made, but the system may be booked for future conferences. The setting is intended for use
in case of temporary system downtime for maintenance and similar situations.
will be made, but the system may be booked for future conferences. The setting is intended for use
in case of temporary system downtime for maintenance and similar situations.
■
Reachable on LAN: The system is located on the same LAN as Cisco TMS and will communicate
using the IP address or FQDN configured in
using the IP address or FQDN configured in
Advanced Network Settings for Systems on Internal
LAN
.
■
Reachable on Public Internet: The system is located outside the LAN, but is reachable on a public
network address and uses the TMS Server Address (FQDN or IPv4 Address) to communicate with
Cisco TMS, see
network address and uses the TMS Server Address (FQDN or IPv4 Address) to communicate with
Cisco TMS, see
.
Allow Book-
ings
ings
Allows the system to be added to conferences.
Selecting
No will stop the system from being booked in the future but will not affect existing conferences.
Table 65 Connection parameters for system communication on the Connection tab
Permissions
The Permissions tab controls permissions for the use and administration of a specific system for Cisco TMS user groups.
The permission levels that can be set are the same as can be set on folders. For details, see
The permission levels that can be set are the same as can be set on folders. For details, see
and
.
Logs
Log
Description
History
All detected changes that have been made to the system in Cisco TMS.
.
Audit Log Changes to attributes for this system. For more information, see
Table 66 The Logs contains all available logs for the system
Add Systems
In Cisco TMS:
Systems > Navigator
Add Systems has been clicked
When clicking Add Systems in the System Navigator, five tabs are displayed:
107
Cisco TelePresence Management Suite Administrator Guide
Adding and Managing Systems