Cisco Cisco TelePresence Management Suite (TMS) Version 15 Maintenance Manual
Adding systems
Cisco TMS Administration Guide
Page 13 of 39
•
Standard RealtimeandTracesCollection
8. Add the above application user to the newly created user group.
Adding the Ci sco Unified CM and CTS s
1. In Cisco TMS, go to System s > Navigator.
2. Select the folder where you want to add your Cisco Unified CM.
3. Click Add System s.
4. Enter the IP address or DNS name of the Cisco Unified CM to add (if you want to add more than
one Cisco Unified CM, add the IP range).
5. In the Advanced Settings pane;
a.
Enter Username
b.
Enter Password
c.
Check the Di scover Non-S NMP Systems checkbox.
6. Click Next to add the Cisco Unified CM (s). The confirmation page displays which CTSs are
registered to each Cisco Unified CM.
7. Select the folder where you want to add your CTSs.
8. Click Add System s.
9. Select the From List tab.
10. Click Cisco Uni fied CM.
11. Select the CTS(s) you want to add.
12. Click Next to add the CTS(s ).
Adding a Cisco TelePresence Recording Server
Cisco TMS supports the addition or Cisco TelePresence Recording Servers for booking and
management purposes.
management purposes.
To add a Rec ording Server to Cisco TMS follow the procedures in the Add System s tab
description.
description.
Select Di scover Non-S NMP Systems. Note that this will significantly increase the time required
for discovery in the Advanced Settings pane of the tab.
for discovery in the Advanced Settings pane of the tab.
Note: You need to add the Recording Server's API username and password when adding the system
to Cisco TMS.
to Cisco TMS.
How pre-registration works
When pre-registering a system, you can select whether you want the system to be identified on MAC
Address, IP/Hostname or Serial Number.
Address, IP/Hostname or Serial Number.
Note that only the Cisco TeleP resence System MXP series and Polycom HDX endpoints can pre-
register based on serial number. Also keep in mind that only systems supporting SNMP can be pre-
registered by serial number and MAC-address if they are using static IP addresses. Cisco
TelePresence System MXP endpoints are using HTTP traps rather than S NMP traps to communicate
with the Cisco TMS server for most information. They are therefore dependent on having their
External Manager’s IP address configured. This is done automatically when the endpoint contacts the
DHCP server to retrieve an IP address, but only if the option 242 on the DHCP server is configured to
point to the Cisco TMS server.
register based on serial number. Also keep in mind that only systems supporting SNMP can be pre-
registered by serial number and MAC-address if they are using static IP addresses. Cisco
TelePresence System MXP endpoints are using HTTP traps rather than S NMP traps to communicate
with the Cisco TMS server for most information. They are therefore dependent on having their
External Manager’s IP address configured. This is done automatically when the endpoint contacts the
DHCP server to retrieve an IP address, but only if the option 242 on the DHCP server is configured to
point to the Cisco TMS server.