Cisco Cisco Unified IP Interactive Voice Response (IVR) 8.0(1) Installation Guide
Chapter 3 Installation and Upgrade Requirements, Prerequisites, and Related Procedures
Verifying Hardware Settings and Connectivity
3-8
Cisco Customer Response Solutions Installation Guide, Release 6.0(1)
Note
Cisco CRS does not support NIC teaming.
Verifying Hardware Settings and Connectivity
This section describes procedures that you should follow to verify hardware
settings and connectivity. You should perform these procedures as follows:
settings and connectivity. You should perform these procedures as follows:
•
If you are installing Cisco CRS, perform these procedures before you install
•
If you are upgrading Cisco CRS, perform these procedures after you install
the Cisco-provided operating system.
the Cisco-provided operating system.
•
If you are upgrading from a multiple-server CRS 3.5 deployment, perform
these procedures after you re-image the servers
these procedures after you re-image the servers
The procedures to verify hardware settings and connectivity are:
•
•
•
Table 3-1
Connecting Servers with Two NICs to the Network
Server Model
NIC Connection
Cisco MCS-7825
Use the lower NIC connector
Cisco MCS-7835
Use the NIC 1 connector
Cisco MCS-7845
Use the NIC 1 connector
IBM xSeries 330
Use the upper NIC connector