Cisco Cisco ASR 5700
AAA Server Group Configuration Mode Commands
radius keepalive ▀
Command Line Interface Reference, StarOS Release 17 ▄
209
password
Specifies the password to be used for authentication.
password
must be an alphanumeric string of 1 through 63 characters.
Default password: Test-Password
retries number
Specifies the number of times the keepalive access request to be sent before marking the server as
unreachable.
unreachable.
number
must be an integer from 3 through 10.
Default: 3
timeout timeout_duration
Specifies the time interval between keepalive access request retries.
timeout_duration
must be an integer from 1 through 30.
Default: 3 seconds
username user_name
Specifies the user name to be used for authentication.
user_name
must be an alphanumeric string of 1 through 127 characters.
Default: Test-Username
valid-response access-accept [ access-reject ]
Specifies the valid response for the authentication request.
If
If
access-reject
is configured, then both access-accept and access-reject are considered as success for the
keepalive authentication request.
If
If
access-reject
is not configured, then only access-accept is considered as success for the keepalive
access request.
Default:
Default:
keepalive valid-response access-accept
Usage
Use this command to configure the keepalive authentication parameters for the RADIUS server.
Example
The following command configures the user name for RADIUS keepalive access requests to
Test-
Username2
:
radius keepalive username Test-Username2
The following command configures the number of RADIUS keepalive retries to
4
:
radius keepalive retries 4