Cisco Cisco ASR 5700
Exec Mode Commands (D-S)
▀ sgsn op
▄ Command Line Interface Reference, StarOS Release 17
4186
rate
: an integer from 0 to 100.
bvc_id
: an integer from 0 to 65000.
nse_id
: an integer from 0 to 65535.
bvc-reset bvc-id bvc_id nse-id nse_id
: SGSN initiates a BVC-Reset on the specified BVC
and NSE:
bvc_id
: an integer from 0 through 65000.
nse_id
: an integer from 0 through 65535.
nsvc nsvc_id { block | enable | disable | unblock }nse_id
- SGSN initiates NS-
Block or NS-Unblock for the specified NSVC of the specified NSE:
nsvc_id
: an integer from 0 through 65535.
nse_id
: an integer from 0 through 65535.
reset nse-id nse_id
- SGSN initiates NS-Reset for all NSVC configured in the NSE.
nse_id
is
an integer from 0 through 65535.
unblock nse-id nse_id
- SGSN initiates NS-Unblock for all NSVC configured for the specified
NSE.
nse_id
is an integer from 0 through 65535.
sgsn-invoke-trace nse-id nse_id record-type record_type trace-reference reference
[ mobile-id type id_type | trace-transaction-id trace_id
[ mobile-id type id_type | trace-transaction-id trace_id
]
:
Important:
This command can be used for troubleshooting/debugging purposes and is
primarily intended for the use of specially trained service representatives.
Instructs the SGSN (1) to send the BSSGP message SGSN-INVOKE-TRACE to the BSC to initiate a BSC
trace of a particular MS and (2) to define the type and triggering of the trace.
trace of a particular MS and (2) to define the type and triggering of the trace.
nse_id
: Identifies the peer NSE, enter an integer from 0 to 65535.
record_type
: Specifies the type of trace to be performed:
basic
handover
no-bss-trace
radio
trace-reference reference
: Specifies the trace reference ID as an integer from 0 to 65535.
mobile-id type id_type
: Select the appropriate mobile ID type for the MS that is to be traced:
imei value value
- Specifies the mobile ID type as the unique International Mobile
Equipment Identity.
value
: 15-digit IMEI value.
imeisv value value
: Specifies the mobile ID type as the unique International Mobile
Equipment Identity with the two-digit software version number.
value
: 16-digit IMEISV value.
imsi value value
- Specifies the mobile ID type as a network unique International Mobile
Subscriber Identity as a 15-digit IMSI value.
trace-transaction-id trace_id
: Specifies the trace transaction ID as an integer from 0 through
65535.