Cisco Cisco ASR 5700
Exec Mode Commands (D-S)
▀ sgsn op
▄ Command Line Interface Reference, StarOS Release 17
4188
inactivate
: Sends an M3UA ASP Inactive message to deactivate the link.
inhibit
: Inhibits the M3UA link locally when the operator wants to lockout the link.
terminate
: Sends SCTP Shutdown message which closes the SCTP association gracefully.
un-inhibit
: Uninhibits the M3UA link.
up
: Sends an M3UA ASP UP message to bring up the M3UA link.
asp_id
: Specifies a relevant ASP configuration ID as an integer from 1 through 4.
peer_id
: Specifies the relevant peer server configuration ID as an integer from 1 through 144.
psp_id
: Specifies the relevant PSP configuration ID as an integer from 1 through 4
Usage
In most cases, an operator will block/unblock/reset from the BSC-side. The
nse
commands cause the SGSN
to initiate actions, usually for one of the following reasons:
to resolve issues on the BSC-side,
as part of an upgrade to the BSC,
as part of link expansion,
to resolve NSVC/BVC status mismatches observed between the SGSN and BSC.
The
sgsn-invoke-trace
command initiates the trace procedure where the BSC begins a trace record on a
specified MS.
Example
The following command instructs the SGSN to initiate an NS-Block for all NSVC associated with Frame
Relay NSE ID
Relay NSE ID
2422
:
sgsn op nse fr unblock nse-id 2422
Activate linkset
1
configured in SS7 routing domain
1
:
sgsn op ss7-rd 1 linkset activate linkset-id 1