Cisco Headend System Release 2.5 Installation Guide
Create, Modify, or Delete Hubs
4017650 Rev C
23
Configuration One: Distributed DNCS Disabled and Network Binding Disabled
Creating New Hubs
1 From the DNCS Administrative Console, click the DNCS tab, and then click the
1 From the DNCS Administrative Console, click the DNCS tab, and then click the
Network Element Provisioning tab.
2 Click Hub. The Hub List window opens.
3 From the Hub List, select File and choose New. The Set Up Hub window opens.
4 Click the Headend Name arrow and select a headend name from the list.
5 Click in the Hub Name field and type the name you will use to identify this hub
4 Click the Headend Name arrow and select a headend name from the list.
5 Click in the Hub Name field and type the name you will use to identify this hub
(for example, HE1_Hub1). You can use up to 15 alphanumeric characters.
Note: Be sure to use a name that is consistent with the naming scheme used on
your network map.
Note: Be sure to use a name that is consistent with the naming scheme used on
your network map.
6 Click in the Network Id field and type a unique Network ID.
Note: The Network ID is the identifier of the network information table (NIT)
table in DVB ASI. You need this Network ID when you create the NIT tables on
the SI-Server.
table in DVB ASI. You need this Network ID when you create the NIT tables on
the SI-Server.
7 Click Save. The system saves the hub information in the DNCS database and
closes the Set Up Hub window. The Hub List window updates to include the
new hub.
new hub.
8 Do you need to modify a hub?
If yes, go to Modifying a Hub (on page 23).
If no, go to Set Up MPEG Sources (on page 34).
Note: If you need to delete a hub, go to Deleting a Hub, later in this section.
Modifying a Hub
After you have created and saved a hub, you can only modify the hub name.
Important: To change any other parameters, you must delete the hub, and then
re-add it to the DNCS, using the new information. To delete a hub, go to Deleting a
Hub, next in this section.
1 From the DNCS Administrative Console, click the DNCS tab, and then click the
re-add it to the DNCS, using the new information. To delete a hub, go to Deleting a
Hub, next in this section.
1 From the DNCS Administrative Console, click the DNCS tab, and then click the
Network Element Provisioning tab.
2 Click Hub. The Hub List window opens.
3 Click once on the row containing the hub you want to modify.
3 Click once on the row containing the hub you want to modify.