Cisco Headend System Release 2.5 Installation Guide
Chapter 3 Setting Up Hubs, MPEG Sources, MQAM Modulators, PCGs, and SCSs
58
4017650 Rev C
2 Click SCS. The SCS Devices window opens.
3 Select the radio button and choose the SCS you want to delete. Click Delete
Selected SCS.
4 Change your network map to reflect these changes.
5 Click Exit.
5 Click Exit.
Setting Up SCS Ports Modeling Parameters
1 On the DNCS Administrative Console, click the DNCS tab, and then click the
Network Element Provisioning tab.
2 Click SCS. The SCS Devices window opens. Select an SCS and choose one of the
following options:
Click Ports for selected SCS.
Click Open Selected SCS and then click Maintain Ports.
Result: The SCS <Name of SCS> Ports window opens.
3 Click Add Input Port. You can add the input port values.
4 For input port on this SCS, click in the Port Number field, and type the number
4 For input port on this SCS, click in the Port Number field, and type the number
identifying the input port.
Important: The first port number should always be 1 (one).
Important: The first port number should always be 1 (one).
5 For input port on this SCS, click in the TSID field, and type the number
identifying the transport stream on this SCS input port.
Notes:
Notes:
You must specify unique transport stream IDs for input and output ports on
the SCS.
the SCS.
The Input Frequency supports any devices that can use Intermediate
Frequency (IF). For D96xx devices that receive ASI input, leave this field
empty.
Frequency (IF). For D96xx devices that receive ASI input, leave this field
empty.