Cisco DNCS System Release 2.7 3.7 4.2 Installation Guide
Stop and Disable Unneeded Processes
OL-31613-01
47
Stop and Disable Unneeded Processes
After the upgrade completes and the processes are started, all processes will be
running (green). If your system included EC processes that were not running or
enabled before the upgrade they should be stopped and/or disabled after the
upgrade.
running (green). If your system included EC processes that were not running or
enabled before the upgrade they should be stopped and/or disabled after the
upgrade.
To stop and disable a process, complete the following procedure:
Example: The example used throughout this procedure involves stopping and
disabling the ocdlManager process.
disabling the ocdlManager process.
Important: If you have completed all procedures to this point, you should already
have the following windows open from a remote PC, Mac, or other system:
have the following windows open from a remote PC, Mac, or other system:
An xterm, putty, or remote terminal window logged into the EC
Firefox logged into the EC Administrative Console
If they are not open, from a PC, Mac or other system, open them now and log in
using an Administrator user account.
using an Administrator user account.
Note: In this procedure, we will disable saManager.
1 Change to the dncs user.
2 At the command prompt, as dncs user, type dncsStart and press Enter.
3 Type the following command and press Enter. The dncsControl window opens.
1 Change to the dncs user.
2 At the command prompt, as dncs user, type dncsStart and press Enter.
3 Type the following command and press Enter. The dncsControl window opens.
dncsControl
4 Type
2
(Startup/Shutdown Single Group of Process) and press Enter.
5 Type
1
(dncs) and press Enter.
6 Type
e
(Display Groups) and press Enter.
7 Type
14
and press Enter.