Cisco DNCS System Release 2.7 3.7 4.2 Installation Guide
Chapter 5 SR 7.0 Post Upgrade Procedures
48
OL-31613-01
8 Type
e
(Display Process Entries) and press Enter.
9 Type
1
(saManager) and press Enter.
10 To stop the process, type
1
(stopped) and press Enter. The process status changes
to red in the Process Status tree.
11 Do you want to disable the process?
Note: Disabling the process removes the process from the Process Status tree.
If yes, type
1
(saManager) and press Enter, then type
4
(disabled) and press
Enter. The saManager process is removed from the Process Status tree.
If no, go to step 12.
12 Repeat this procedure to stop/disable other processes, as needed.
Important: Once you get to step 7, the entries may change in order to view the
appropriate display group.
appropriate display group.
13 To exit the dncsControl window, type
X
(Return to Menu) until the dncsControl
window closes.
14 Type the following commands and press Enter to stop and kill the dncs
processes:
dncsStop
dncsKill
Important: Wait for all processes to stop before executing dncsKill.