Cisco Cisco StadiumVision Mobile Streamer Maintenance Manual
the return process with the vendor.
SV-4K and DMP-2K Diagnostic URL
Some of the troubleshooting steps for the SV-4K and DMP-2K recommend that you
open a browser and navigate directly to the device using the following URL to further
diagnose a problem:
http://dmp-ip-address
The diagnostic URL requires a password for use. The password is set in the
"defaultDmpAdminPwd" registry key in the Management Dashboard (the same
password as for the Cisco DMP 4310G). The default username is "admin."
Be sure to reset the password from the default value as a security best practice.
CAUTION: Do not manually power off the SV-4K and DMP-2K
after changing the password. To change the SV-4K and DMP-2K
password, you must use the Power Cycle DMP switch command
from the Management Dashboard to restart the device properly.
To use this command, be sure that you have imported the switch
data first.
after changing the password. To change the SV-4K and DMP-2K
password, you must use the Power Cycle DMP switch command
from the Management Dashboard to restart the device properly.
To use this command, be sure that you have imported the switch
data first.
NOTE: This password is also used for the Diagnostic Web
Server (DWS), and is used by the Cisco DMP 4310G.
Server (DWS), and is used by the Cisco DMP 4310G.
Troubleshooting PTP Operation for the SV-4K and DMP-
2K Media Player
2K Media Player
This section identifies some of the symptoms related to problems with PTP operation:
l
l
58 of 80
© Cisco Systems, Inc. All rights reserved.