Cisco Cisco StadiumVision Mobile Streamer Maintenance Manual

scripts, and configure it to run for a duration of at least two minutes (120 seconds)

before changing to a different state.

TIP: The actual duration for the empty state depends on the

number of media players in the system and the amount of time it

takes to stage any content. Manually staging content before you

run a script can help reduce this time.

Do not change an event state more frequently than the following:

SV-4K and DMP-2K media players: 15 seconds minimum

DMP 4310G: 60 seconds minimum

If you are supporting an environment with mixed DMPs that use the same script, it

is important to allow for 60 seconds for an event state change.

Play the event scripts to visually verify each state and ad hoc states within a

venue.

Validate Content

TIP: For complete content creation guidelines on the Cisco DMP

4310G and SV-4K, see

This section includes the following topics:

Best Practices for Image Validation

Be sure that any static images are either non-progressive JPGS or PNG files.

Images must use RGB Colors, not CMYK.

NOTE: Some CMYK images may look normal on your

computer but will not work with Cisco StadiumVision Director.

From the Content screen in the Control Panel:

10 of 70