Cisco Cisco StadiumVision Mobile Streamer Maintenance Manual
© 2012 Cisco Systems, Inc. All rights reserved.
Page 18 of 103
housing and the cable connectivity. DMP and display mounting design and
installation should be coordinated with the customer's installation contractor.
installation should be coordinated with the customer's installation contractor.
You should plan to install the DMP and the TV at the same time since there is often
tight fitting and millwork to work around and it is easier and cheaper to do it all at
once. Rigid mounts are much preferred to Velcro or other adhesives, as these can
with stand the continuous heat radiation from the DMP.
tight fitting and millwork to work around and it is easier and cheaper to do it all at
once. Rigid mounts are much preferred to Velcro or other adhesives, as these can
with stand the continuous heat radiation from the DMP.
The following three DMP mounting options have been implemented successfully at
various Cisco StadiumVision sites:
various Cisco StadiumVision sites:
•
•
•
Cisco Träger Mounting Bracket (custom)
The Cisco Sports and Entertainment Group (SESG) has designed a custom
“Träger” mounting bracket for attaching the DMP to the TV. The Träger bracket has
the following features:
“Träger” mounting bracket for attaching the DMP to the TV. The Träger bracket has
the following features:
• Inexpensive
• Manufactured from light-weight, but durable, material
• Custom-designed to fit the DMP 4310 form factor
• An optional method to secure the DMP from removal
• Easy access to the TV/DMP rear panel and cabling
• Lateral ventilation slots on three sides to allow airflow through the DMP
You can attach the Träger bracket to the TV using Velcro or another semi-
permanent/permanent fastener. The Velcro is applied between the rear of the TV
and the back of the Träger bracket rather than directly to the DMP. This design
securely attaches the DMP to the TV or any surrounding millwork, while allowing the
DMP to easily slide out of the Träger for servicing.
You can attach the Träger bracket to the TV using Velcro or another semi-
permanent/permanent fastener. The Velcro is applied between the rear of the TV
and the back of the Träger bracket rather than directly to the DMP. This design
securely attaches the DMP to the TV or any surrounding millwork, while allowing the
DMP to easily slide out of the Träger for servicing.
For best cooling do not mount the DMP with the front mesh facing downward.
Instead insert the DMP into the bracket with the bottom (non-Cisco logo side) facing
away from the TV or wall.
Instead insert the DMP into the bracket with the bottom (non-Cisco logo side) facing
away from the TV or wall.
The Träger bracket is manufactured upon request by Triangle Stainless Inc. It is not
orderable from Cisco Systems and is not on the Cisco Systems pricelist. For pricing
and lead times contact them via their web site
orderable from Cisco Systems and is not on the Cisco Systems pricelist. For pricing
and lead times contact them via their web site
Specifications
Material: 1.59mm (0.0625”) Stainless Steel
Dimensions: 182.778mm (7.196”) x 149.428mm (5.883”) x 41.631mm (1.639”)