Canon pixma mp600 Quick Setup Guide

Page of 112
66
Routine Maintenance
4
Load this and only this sheet of paper in the 
Auto Sheet Feeder with the open side to the 
front. 
5
Perform bottom plate cleaning.
(1) Select Settings on the HOME screen.
(2) Select Maintenance, then press the OK button.
The Maintenance screen is displayed.
(3) Select Bottom plate cleaning, then press the OK button.
The confirmation screen is displayed.
(4) Select Yes, then press the OK button.
The paper cleans the inside of the machine as it feeds through the machine.
If the ejected paper is smudged, clean the inside of the machine again.
If the problem is not resolved after performing cleaning again, the protrusions inside the 
machine may be stained. Clean them according to instructions. See “Cleaning the 
Protrusions Inside the Machine” on page 66.
„
Cleaning the Protrusions Inside the Machine
If protrusions inside the machine are stained, wipe off any ink from the protrusions using a cotton 
swab or the like.
Important
z
Even if the Cassette is selected as the paper source, paper will be fed from the Auto Sheet 
Feeder.
z
Do not perform any other operation while the bottom plate is being cleaned.
Important
Before cleaning the inner parts, be sure to turn the machine off.
downloadlike
ArtboardArtboardArtboard
Report Bug