Canon pixma mp600 Quick Setup Guide

Page of 112
4
Before Printing
Turning the Machine On and Off
Turn on the machine before printing.
„
Turning on the Machine
Before turning on the machine, confirm the following.
z
The Print Head and ink tanks are set into place.
If you are using the machine connected to a computer, confirm also the following.
z
The machine is connected to your computer (or a compatible device).
z
The MP Drivers are installed.
1
Open the Operation Panel and press the ON/
OFF
 button to turn on the machine. 
The POWER lamp flashes green, and changes to 
steady, non-flashing light.
2
If you are using the machine connected to a 
computer, turn on your computer.
„
Turning off the Machine
1
To turn off the machine, press the ON/OFF 
button. 
When the POWER lamp stops flashing, the 
machine is turned off.
z
The Screen-saver Mode
The LCD goes out if the machine is not operated for 5 minutes. Press any button to restore the 
display. You cannot change the wait time before the LCD goes out.
Note
If preparatory operations above are not complete, follow the Easy Setup Instructions to complete 
them.
Important
If the ALARM lamp lights up or flashes orange and an 
error message is displayed on the LCD, see “Error 
Important
About the Power Plug
When removing the power plug after turing off the 
machine, be sure to confirm that the POWER lamp is 
not lit. If the power plug is removed from the wall outlet 
with the POWER lamp still lit or flashing green, the 
machine may become unable to print.
See “Keeping the Best Printing Results” on page 51.
downloadlike
ArtboardArtboardArtboard
Report Bug