Sony dtc-690 User Manual
32
Connecting Cords
There are following three types of
connecting jacks at the rear of the deck.
Each type of jack requires a different type
of connecting cord.
connecting jacks at the rear of the deck.
Each type of jack requires a different type
of connecting cord.
For LINE IN/OUT (analog input/
output) jacks
output) jacks
Å
Use the supplied or an optional audio
signal connecting cord such as RK-
C710HS, RK-C715HS, RK-C910ES, RK-
C915ES etc.
signal connecting cord such as RK-
C710HS, RK-C715HS, RK-C910ES, RK-
C915ES etc.
Note
Red plugs and jacks are for the right
channel (R) and white ones for the left
channel (L).
channel (R) and white ones for the left
channel (L).
For COAXIAL IN (digital input) jacks
ı
Use an optional coaxial connecting cord
such as VMC-1ES, VMC-10ES etc.
such as VMC-1ES, VMC-10ES etc.
For OPTICAL IN/OUT (optical
transmission digital input/output)
jacks
transmission digital input/output)
jacks
Ç
Use an optional optical cable such as
POC-15, POC-10HS etc.
POC-15, POC-10HS etc.
How to connect the optical cable
Î
Remove the cap and plug it in firmly.
Notes on the optical cable
• Do not bend the cord. When the cord is
not used, curl it
with a diameter of more than 15 cm (5
with a diameter of more than 15 cm (5
7
/
8
inches).
• Do not use it under high temperatures.
• When the optical cable is not connected,
• When the optical cable is not connected,
cover the OPTICAL IN/OUT jacks with
the supplied caps.
the supplied caps.
OPTICAL IN
OPTICAL OUT
COAXIAL
OUT
COAXIAL IN
A
B
C
D
]
L
R
L
R
LINE OUT
LINE IN
Connections