Panasonic kx-tda30ne User Manual
2.1 Control Features
User Manual
151
2.1.7
Using the Telephones in a Hotel-type Environment
(Hospitality Features)
(Hospitality Features)
The hotel operator can check in or check out guests from his extension. When the hotel operator presses a
flexible button assigned as "Check-in" or "Check-out" on his extension, the extension will switch to Room
Status Control mode, and DSS button lights will show the current room status of extensions. Other features
can also be used in a hotel-type environment.
flexible button assigned as "Check-in" or "Check-out" on his extension, the extension will switch to Room
Status Control mode, and DSS button lights will show the current room status of extensions. Other features
can also be used in a hotel-type environment.
–
–
–
–
Check-in
The hotel operator can change the room status of extensions to check-in by using the Check-in button
assigned on his extension.
assigned on his extension.
To check in
•
The hotel operator must be using a 6-line display PT.
•
Each DSS button light shows the current status as follows:
Off: Check-out
Red on: Check-in
Off: Check-out
Red on: Check-in
•
While in Room Status Control mode, the hotel operator extension is considered to be busy.
•
While in Room Status Control mode, the display, INTERCOM button, and flexible buttons do
not operate for other telephone features.
not operate for other telephone features.
•
Some of the operations in this section require system programming. Consult your dealer.
•
After check-in, Remote Extension Lock is deactivated, and the guest can make outside calls
from the room extension. (Refer to "2.1.1 Extension Control".)
from the room extension. (Refer to "2.1.1 Extension Control".)
•
After check-in, all billing data previously charged to the extension will be cleared
automatically.
automatically.
•
When the room status of extensions is changed, detailed room status information is recorded
automatically. This requires system programming.
<Example>
automatically. This requires system programming.
<Example>
Press
Check-in.
Dial
extension number and then press
"ENTER", or press desired DSS.
OR
extension no.
(DSS)
While on-hook
ENTER
Display PT
Press
"YES".
Press "
EXIT"
or
Check-in.
YES
EXIT
OR
(Check-in)
(Check-in)
Date
Time
Ext
CO
Dial Number
03:07PM
1234
Check in
02/02/00