FIC mb02 Service Manual
Installation and Upgrade
FIC MB02 Service Manual
2-7
Figure 2-6
Remove heat sink plate and Fan
8. Use a flat screwdriver to unlock CPU.
Figure 2-7
Remove CPU
9. Remove CPU and insert the preferred CPU.
10. Use a flat screwdriver to lock CPU.
11. Place back the heat plate and keyboard cover. Boot on the computer, and then BIOS will
automatically detect the type of the CPU which just be installed.
2.3.3 Memory Upgrade Procedure
The notebook computer offers two memory slot using DDR DIMM at 128MB, 256MB,
512MB and 1024MB DDR-RAM. Two memory slots are found inside the memory
compartment. The memory compartment is located on the underside of your computer inside
the memory compartment. With two memory slots, you can have several combinations up to
2048MB.
512MB and 1024MB DDR-RAM. Two memory slots are found inside the memory
compartment. The memory compartment is located on the underside of your computer inside
the memory compartment. With two memory slots, you can have several combinations up to
2048MB.
PDF created with FinePrint pdfFactory trial version