Panasonic wv-cu360 User Manual

28

You can setup the system unit and the camera with the
setup menu by this controller.
For further information, refer to the Operating Instructions
for system units and the individual combination cameras.

●

1. Select the desired system unit compatible with

Panasonic Security Data mode.

2. Press the 

button for more than 2

seconds. The 

indicator lights up.

The Setup menu for the system unit appears on the
monitor.

Example of Setup Menu in WJ-MP204

3. To complete the setup, press the 

button for 2 seconds or more.
The 

indicator goes off.

• For the system unit defaults, refer to the Operating

Instructions for the individual system units.

• If you change the default baud rate or parity check, the

system unit setup function is disabled.

• The setup for system units differ depending on each

unit. Refer to the Operating Instructions for each unit
before setting up them.

Keys Used for System Unit with Setup Menu

The key functions differ from one system to another.

Refer to the Operating Instructions for each unit before
operating its keys.

●

1. Select the desired camera.

2. Press the 

button for 2

seconds or more to access the Camera Setup menu.
The 

indicator lights up.

3. Select an item and parameter by pressing numeric but-

tons 

, 

, 

and 

.

(Example of Camera Setup menu)

4. Press the 

button to execute the parameter or

enter a submenu.

5. To return to the previous menu, press the 

button.

6. Press the 

button for 2

seconds or more to complete the camera setup.

To move the cursor.

To select a parameter.

To execute the parameter or
To enter a submenu

To return to the previous menu

DOWN

L

R

UP

L

R