Konica Minolta 7035 User Manual

11

– Use the key pad to enter the number of the counter (000 to

127), for for which you want to allocate a password.

– Now, press the Password key.

– You can now enter a 5-digit code as a user password.

The user code 00000 will not be accepted.

– Press the Name key, and enter the name (max 24 digits) of the

user, to whom this password is allocated.

– Confirm the name with OK.

– Under Limit, a max. copy limit can be programmed for this

user code. This is optional.

– Use the key pad to enter a max. copy quantity, if desired.

Finally, confirm all entries for this counter by pressing OK.

– If you have allocated a user code which already exists as a

password for a different counter, you will now be prompted to
change the code. Press YES and enter a different password.
Confirm by pressing OK again.

Call up this list to check, delete or enter changes to EKC
passwords.

To Change an Entry
– Use the arrows to mark the required counter and press EDIT.

To Delete an Entry
– Use the arrows to mark the required counter and press

DELETE.

To Add an Entry
– Press the ADD key, and allocate a password as explained

above (4.1).