Panasonic KX-MB2575 Operating Guide
Problem
Cause & Solution
The unit does not appear in
the [Select a Network Device]
dialogue box when installing
Multi-Function Station.
the [Select a Network Device]
dialogue box when installing
Multi-Function Station.
R Your firewall software is blocking the connection and the setup program may
not list any units. Consult your network administrator and temporarily disable
the firewall software.
the firewall software.
R The unit is connected to another network segment and the setup program
may not list any units. Make sure the network is configured correctly. Consult
your network administrator.
your network administrator.
The [Windows Security Alert]
dialogue box appears and
asks if I want to block
[PCCMFLPD] and I cannot
operate the following
functions after installing the
Microsoft Windows XP
Service Pack 2 or later.
– PC printing
– Scanning
– Remote Control
– PC FAX (y)
– Device Monitor
dialogue box appears and
asks if I want to block
[PCCMFLPD] and I cannot
operate the following
functions after installing the
Microsoft Windows XP
Service Pack 2 or later.
– PC printing
– Scanning
– Remote Control
– PC FAX (y)
– Device Monitor
R Click [Keep Blocking] and run the Windows Firewall Setting Tool to allow
12.4.8 Wireless LAN y
Problem
Cause & Solution
The network name (SSID) of
the wireless access point
cannot be detected.
the wireless access point
cannot be detected.
R The wireless access point is configured to not show the network name
(SSID). Enter the network name (SSID) manually (feature #585 on
page 27).
page 27).
R Place the unit and your wireless access point close together, and then try
to configure again.
R If appliances that generate magnetic waves (microwave ovens, digital
cordless telephones, etc.) or other wireless LAN devices are located near
by:
– Keep the above devices away from the unit and your wireless access
by:
– Keep the above devices away from the unit and your wireless access
point.
– Temporarily turn the power of the above devices off.
I cannot find the network
name (SSID) and/or network
key.
name (SSID) and/or network
key.
R Confirm the setting information of your wireless access point. For details
about the procedure, refer to the documentation for your wireless access
point.
point.
The unit cannot be connected
to the wireless access point.
to the wireless access point.
R Place the unit and your wireless access point close together, and then try
to configure again.
R If appliances that generate magnetic waves (microwave ovens, digital
cordless telephones, etc.) or other wireless LAN devices are located near
by:
– Keep the above devices away from the unit and your wireless access
by:
– Keep the above devices away from the unit and your wireless access
point.
R The settings for your wireless access point are wrong. Confirm the setting
information of your wireless access point, and then try configuring again.
For details about the procedure, refer to the documentation for your wireless
access point.
For details about the procedure, refer to the documentation for your wireless
access point.
R Your wireless access point is configured to limit access from certain devices.
Confirm the settings of your wireless access point.
Wireless communication is
slow and/or unstable.
slow and/or unstable.
R If there are obstacles between the unit and your wireless access point, move
the unit as close as possible to your wireless access point.
R If appliances that generate magnetic waves (TVs, microwave ovens, digital
cordless telephones, etc.) are located nearby, keep the unit and your
wireless access point away from the above devices.
wireless access point away from the above devices.
123
12. Help