Panasonic KXFC195GRG Operating Guide
7. Programmable Features
48
7 Programmable Features
Features (Base Unit)
7.1 Base unit
programming
programming
7.1.1 Programming basic
features
features
1
Press {MENU}.
2
Select the feature you wish to program.
Press {<} or {>} repeatedly to display the
desired feature.
Press {<} or {>} repeatedly to display the
desired feature.
L
The current setting of the feature will be
displayed.
displayed.
3
Press {A} or {B} repeatedly to display the
desired setting.
desired setting.
L
This step may be slightly different
depending on the feature.
depending on the feature.
4
Press {SET}.
L
The setting you selected is set, and the
next feature will be displayed.
next feature will be displayed.
5
To exit programming, press {MENU}.
7.1.2 Programming advanced
features
features
1
Press {MENU}.
2
Press {<} or {>} repeatedly to display
“ADVANCED MODE”.
“ADVANCED MODE”.
3
Press {SET}.
4
Select the feature you wish to program.
Press {<} or {>} repeatedly to display the
desired feature.
Press {<} or {>} repeatedly to display the
desired feature.
L
The current setting of the feature will be
displayed.
displayed.
5
Press {A} or {B} repeatedly to display the
desired setting.
desired setting.
L
This step may be slightly different
depending on the feature.
depending on the feature.
6
Press {SET}.
L
The setting you selected is set, and the
next feature will be displayed.
next feature will be displayed.
7
To exit programming, press {MENU}.
Programming by entering the program
code number directly
code number directly
You can select a feature by directly entering the
program code (# and a 2-digit number) instead of
using {<} or {>}.
program code (# and a 2-digit number) instead of
using {<} or {>}.
1. Press {MENU}.
2. Press {#} and the 2-digit code number
3. Press {A} or {B} repeatedly to display the
desired setting.
4. Press {SET}.
5. To exit programming, press {MENU}.
To cancel programming
Press {MENU} to exit the program.
7.2 Basic features
Code #01: Setting the date and time
SET DATE & TIME
PRESS SET
See page 21 for details.
Code #02: Setting your logo
YOUR LOGO
PRESS SET
See page 22 for details.
Code #03: Setting your fax number
YOUR FAX NO.
PRESS SET
See page 24 for details.
Code #04: Printing a sending report
SENDING REPORT
=ERROR
=ERROR
[
±]
To print a sending report for fax transmission
results (page 34).
“ERROR” (default): A sending report will be
printed only when fax transmission fails.
“ON”: A sending report will be printed out after
every transmission.
“OFF”: Sending reports will not be printed out.
results (page 34).
“ERROR” (default): A sending report will be
printed only when fax transmission fails.
“ON”: A sending report will be printed out after
every transmission.
“OFF”: Sending reports will not be printed out.
{<}{>}{
A
}{
B
}
{
MENU}
{
SET}
FC195GR.book Page 48 Wednesday, April 2, 2003 11:39 AM