Panasonic KXMB1530FX Operating Guide

MSetNMCNMDNMEN

MStopN MStartN

MCopy SizeN

MQualityN

MFax Auto AnswerN

MCopyN

* The pictured model is KX-MB1520.

If the MCopyN light is OFF, turn it ON by pressing
MCopyN repeatedly.

If necessary, change the copy size (original
document size and recording paper size), resolution
and contrast according to the type of document.
R To select the copy size, see page 31.
R To select the contrast, see page 31.
R To select the resolution, see page 31.

If necessary, enter the number of copies (up to 99).

MStartN
R The unit will start copying.

After you finish copying, press MStopN to reset the
settings you set in step 3 and 4.

Note:
R To stop copying, see page 65.
R You can change the default operation mode (feature

#463 on page 54) and the timer before returning to
the default operation mode (feature #464 on
page 55) (KX-MB1520/KX-MB1530 only).

R If the MFax Auto AnswerN light is ON, the unit can

receive faxes automatically even when in the copy
mode (KX-MB1520/KX-MB1530 only).

To select the copy size
1. Press MCopy SizeN repeatedly to select “ORIGINAL

SIZE”.

2. Press MCN or MDN repeatedly to select the size of your

original document. A MSetN

3. Press MCN or MDN repeatedly to select the size of

recording paper size.
R When “#2” is selected, you can change the

recording paper size by pressing MEN repeatedly.

R The appropriate zoom rate will be set

automatically. Some copying features cannot be
used during zoom copy. See page 32 for
details.

4. MSetN

To select the contrast
Adjust this setting depending on the darkness or
lightness of the document. 5 levels (low to high) are
available.
1. Press MQualityN repeatedly to display “CONTRAST”.
2. Press MCN or MDN to change the contrast.
3. MSetN

Note:
R You can hold the previous contrast setting (feature

To select the resolution
1. Press MQualityN repeatedly to display

“RESOLUTION”.

2. Press MCN or MDN to change the resolution.

– “TEXT/PHOTO”: For both text and photographs.
– “TEXT”: For text only.
– “PHOTO”: For photographs, shaded drawings,

etc.

3. MSetN

Note:
R You can change the default resolution (feature #461

31

5. . Copier