Panasonic KXFP373FX Operating Guide

Page of 60
8. Help
42
8 Help
8.1 Error messages – Reports
If a problem occurs during fax transmission or reception, one of the following messages will be printed on the sending 
and journal reports (page 21).
Message
Code
Cause & Solution
COMMUNICATION ERROR
40-42 
46-72 
FF
L
A transmission or reception error occurred. Try 
again or check with the other party.
43
44
L
A line problem occurred. Connect the telephone line 
cord to a different jack and try again.
L
An overseas transmission error occurred. Try using 
the overseas mode (feature #23 on page 37).
DOCUMENT JAMMED
-----
L
Remove the jammed document (page 51).
ERROR-NOT YOUR UNIT
53
54
59
70
L
A transmission or reception error occurred because 
of a problem with the other party’s fax machine. 
Check with the other party.
JUNK FAX PROH. REJECT
-----
L
The junk fax prohibitor feature of this unit rejected 
fax reception.
MEMORY FULL
-----
L
The memory is full of received documents due to a 
lack of recording paper, a lack of ink film or a 
recording paper jam. Install paper (page 12), install 
ink film (page 9) or remove the jammed paper (page 
49)
.
NO DOCUMENT
-----
L
The document was not fed into the unit properly. Re-
insert the document and try again.
OTHER FAX NOT RESPONDING
-----
L
The other party’s fax machine is busy or has run out 
of recording paper. Try again.
L
The other party’s fax machine rang too many times. 
Send the fax manually (page 21).
L
The other party’s machine is not a fax machine. 
Check with the other party.
L
The number you dialled is not in service.
PRESSED THE STOP KEY
-----
L {
STOP} was pressed, and fax transmission or 
reception was cancelled.
OK
-----
L
Fax transmission or reception was successful.
FP373FX-PNQX1826ZA-OI-en.book  Page 42  Thursday, November 6, 2008  11:23 AM