Panasonic DP1520 Operating Guide
14
Getting To Know Your Machine
A5
A5-R
A4-R
A3
B4
A4
Width Guides
Face Down
Until it stops
Upper Limit Guides
Until it stops
Sheet Bypass
PUSH
Paper Tray
Max Level
Indicator
Indicator
Paper Tray
∗
∗∗
∗∗
Hold the guides by the center when
adjusting the width
adjusting the width
Operation Chart
If set in other
function mode
function mode
Face Up
A B C
From
ADF/i-ADF
(Option)
ADF/i-ADF
(Option)
From
Platen
Platen
Face Down
● If the original is not positioned
properly, a portion of the original
may not be copied.
may not be copied.
● For originals smaller than A5
size, position the original within
the A5 area and select A5.
the A5 area and select A5.
or
● Adding Paper (Paper Tray)
The following steps are for Paper Tray-1, use the same procedures for other optional Paper Trays.
● Adding Paper (Sheet Bypass)
Copying on Special Paper, etc.
Load Paper: Face Up
Paper Weight: 60 - 90 g/m
Paper Weight: 60 - 90 g/m
2
Paper Capacity: 550 Sheets (80 g/m
2
)
Adjust the width guides.
Incorrect adjustment may cause the
paper to wrinkle, misfed or skew.
Incorrect adjustment may cause the
paper to wrinkle, misfed or skew.
Original Guides
■ Quick Operation Chart
1
1
2
3
Adding Paper
Turn the Power
Switch to the
ON position
Switch to the
ON position
Original Guides∗
∗∗
∗∗
Adjust to the
original's width
original's width
Tray
(Max. 50 A4
size originals)
size originals)
4
4
Load Paper
(Do not exceed limit guides)
Paper Weight: 55 - 133 g/m
(Do not exceed limit guides)
Paper Weight: 55 - 133 g/m
2
Paper Capacity: 50 sheets/80 g/m
2
To add paper to the Sheet Bypass,
remove the leftover paper from the
tray, and align it with the additional
paper and load them together onto the
tray.
remove the leftover paper from the
tray, and align it with the additional
paper and load them together onto the
tray.
NOTE:
Make sure that the paper is set
properly and that it does not exceed
the Max. Level indicator.
properly and that it does not exceed
the Max. Level indicator.
2
1
2
3