Driven Designs Inc. PPS User Manual
Page 9
POOL PATROL PA-25 & PA-30
The “Sensitivity Marks”
(Figure 4) can be used as
a general indicator for the
sensitivity position.
(Figure 4) can be used as
a general indicator for the
sensitivity position.
Should
the
sensitivity
need to be adjusted start
making adjustments by
turning the float only a ¼
turn at a time. Test the
alarm
making adjustments by
turning the float only a ¼
turn at a time. Test the
alarm
after
each
adjustment (see testing
page 3). We do not
recommend turning the
float out more than three
full turns.
page 3). We do not
recommend turning the
float out more than three
full turns.
ALARM RESET
To reset the alarm at any time pick up the alarm and turn it upside down
(180º angle) for 5 seconds. This action will reset the processor and
(180º angle) for 5 seconds. This action will reset the processor and
Increase
Decrease
Figure 4 Sensitivity Marks
Figure 3 Sensitivity Adj