Landis+Gyr Technology Inc. ER6R1S4 User Manual
Draft
Chapter 5 - Managing Endpoints
Landis+Gyr
60
98-1723 Rev AB
User Guide
Add Meters to Virtual Addressing Group
Following is the procedure for adding meters to a Virtual Addressing Group:
1. From Command Center home, select Setup > Groups > Virtual Addressing Groups. The
Virtual Addressing Groups window will open, as shown previously in Figure 5 - 25.
2. Select the Add/Remove Meters icon for the desired group. The Add Meters to Group window
will open, as shown in Figure 5 - 26.
Figure 5 - 26. Add Meters to Group
3. Enter the desired meter numbers separated by colons, semi-colons, or spaces in the Meter
Number text box.
...or...
Select Meter File and enter the path to a file that contains the meters to be added to the group.
Click the Browse button to navigate to the appropriate file is necessary.
Click the Browse button to navigate to the appropriate file is necessary.
4. Click Add to add meters to the group.
Issuing Virtually Addressed Commands
Following is the procedure to issue a command to a Virtual Addressing Group:
1. Select Network > Endpoints > Cellular Residential. The Manage RF Electric Endpoints
window will open, shown in Figure 5 - 27.
Figure 5 - 27. Manage RF Endpoints
2. Addressing. Select Virtual Addressing Group, then click the Select button to view a list of
addressing groups.
...or...