Landis+Gyr Technology Inc. ER6R1S4 User Manual
Draft
Chapter 5 - Managing Endpoints
Landis+Gyr
62
98-1723 Rev AB
User Guide
•
Command Issued. Indicated the time and date the command was issued.
•
Latest Response. Indicates the time the last response was received to the command
from an endpoint.
from an endpoint.
•
Endpoint Model. Indicates the type of endpoint the command was issued for.
•
Encryption Mode. Indicates the encryption mode that was used to send out the
command.
command.
Select the numbered link of Total or Expected to view a list of meters. The results to a Ping are
shown in Figure 5 - 29.
shown in Figure 5 - 29.
Figure 5 - 29. View Commands
NOTE: Process Setting: The Command History Report Batch Process must be enabled in the
Process Settings for the report to work. The process is defaulted to enabled and to run every 4 hours.
Process Settings for the report to work. The process is defaulted to enabled and to run every 4 hours.
Reports
Command Center 6.3 MR1 and later supports the following reports for the Gridstream Enhanced
Cellular. For more information on these reports, please refer to the Command Center Users guide.
publication 98-9108.
Cellular. For more information on these reports, please refer to the Command Center Users guide.
publication 98-9108.
Table 5-3. Supported Command Center Reports
Report Name
Path in Command Center
Assign Meters to Billing Cycles
Reporting > Billing
Billing Cycles
Reporting > Billing
Billing Progress Report
Reporting > Billing
Data Extract -> Conventional
Reporting > Billing
Data Extract -> Interval
Reporting > Billing
Interval Data Extract
Reporting > Billing
Incremental Daily Reads Extract
Reporting > Billing
Endpoint Data Extract
Reporting > Endpoint Data Extract
Scheduled Endpoint Data Extract
Reporting > Endpoint Data Extract
Meter Change Out
Reporting > Meter Change Out
Meter Program Status Report
Reporting > Meter Program Status Report