Landis+Gyr Technology Inc. ER6R1S4 User Manual

Page of 77
Draft
Landis+Gyr
Chapter 5 - Managing Endpoints 
User Guide
98-1723 Rev AB
61
Select Meters, then enter desired meters separated by space, commas or semi-colons.
3. Command to Issue. Select the desired command from the drop down list box.
4. Click Send. The Manage endpoints screen will display a message confirming the success or 
failure of the command issued.
The results of virtually addressed commands can be viewed on the Endpoint Information screen 
Manage tab, in the Log Viewer Commands.
Command History Report 
When a command request is initiated, Command Center will retrieve all of the endpoints that match 
the selection criteria (based on data stored in Command Center). The count will be stored in the 
Expected total on the Command History Report
Following is the procedure for generating the Command History Report:
1. Select Reports > Command History Report. The Command Summary window will open 
displaying all group commands on the current date, shown in Figure 5 - 28. 
The Command Summary features the Webgrid interface which allows for many sorting and 
export options. 
Figure 5 - 28. Command Summary
2. Click the plus (+) sign adjacent to any collector to expand and view commands issued to 
endpoints on the selected collector.
3. Click the plus (+) sign adjacent to Group Commands.
The following information is displayed:
Command Type. Name of the command.
Total Successful. Indicates endpoints that successfully responded to the command.
Total Unsuccessful. Indicated endpoints that were expected to respond successfully but 
did not.
Total  Expected. Indicates the total number of endpoints that are expected to respond to 
the command.
Success %. The percentage of successful responses, when compared to the total 
expected.
Unsuccessful %. The percentage of unsuccessful responses, when compared to the total 
expected.