Manualsbrain.com
  1. Manuals
  2. Brands
  3. Data Critical Corporation
  4. AVTS1010
  5. User Manual

Data Critical Corporation AVTS1010 User Manual

Download
Page of 55
AlarmView™ System User’s Guide 
 
 
 
{insert part #} Page 44 
 
Please be sure the 
transmitter is turned 
on, the IR port is 
pointed directly at the 
transmitter, at a 
distance less than 4 ft. 
(1.2 m) and try again. 
Programmer infrared 
port not aligned with 
transmitter infrared 
port. 
 
Transmitter turned off. 
 
Programmer batteries 
are low. 
 
Transmitter defective. 
 
Programmer 
defective. 
Re-align ports and try 
again. 
 
Turn on transmitter. 
 
Recharge programmer 
batteries. 
 
Contact Data Critical 
Corp. regarding repair 
and/or replacement of 
transmitter or 
programmer. 
Programming Failed 
 
Programmer was 
unable to send 
programming changes 
to transmitter. 
Interference or 
ambient light noise. 
 
Programmer batteries 
are low. 
 
Transmitter defective. 
 
Programmer 
defective. 
Re-align ports and try 
again. 
 
Recharge programmer 
batteries. 
 
Contact Data Critical 
Corp. regarding repair 
and/or replacement of 
transmitter or 
programmer. 
Unable to Access Port 
Probably in Use 
Programmer error. 
Reboot programmer 
by inserting stylus in 
the reset button 
located on the back on 
the programmer. 
 
Contact Data Critical 
Corp. regarding repair 
and/or replacement of 
programmer. 
You must select or get 
a bed number and one 
or more pagers 
Programmer SEND 
button was pressed 
before selecting a bed 
number or pager 
numbers. 
Follow procedure to 
select bed and/or 
pager numbers and 
tap SEND again.