Digital Security Controls Ltd. 01NB9010 User Manual
C h a p t e r 2 : A d v a n c e d P r o g r a m m i n g
3 0
hours. During this time the system will answer incoming downloading calls (see
2.3.14 Downloading on page 51).
2.3.14 Downloading on page 51).
• [6] – User-Initiated Call-Up
When [6] is pressed, the system will initiate a call to the downloading computer.
• [7] Telephone Volume Control
You can change the volume of the voice prompts heard when you access the
NT9010 system by telephone. When you press [7], the NT9010 will prompt
“Phone Volume is High. To change phone volume, press ‘1’. To exit press #.”
Options are ‘Low’, ‘Medium’, and ‘High’, with ‘High’ as the default. You can
change the current selection by pressing [1].
NT9010 system by telephone. When you press [7], the NT9010 will prompt
“Phone Volume is High. To change phone volume, press ‘1’. To exit press #.”
Options are ‘Low’, ‘Medium’, and ‘High’, with ‘High’ as the default. You can
change the current selection by pressing [1].
NOTE:
To change the volume of the voice prompts from the NT9010 unit
you must use the Volume Key on the NT9010.
[*] [8] Flash Programming / Advanced Programming
Enter [✱][8] followed by the Installer Code to enter Flash Programming, or the
Advanced Programming sections (see Section 2.1: Programming the NT9010 on
page 15).
Enter [✱][8] followed by the Installer Code to enter Flash Programming, or the
Advanced Programming sections (see Section 2.1: Programming the NT9010 on
page 15).
[*] [9] Arming Without Entry Delay
When a system is armed with the [✱][9] command the system will remove the entry
delay from the system. After the exit delay, Delay 1 and Delay 2 type zones will be
instant and Stay/Away zones will remain bypassed. (see 2.3.1 Zone Definitions on
page 36). When the system is armed in this mode, the Armed light will be flashing
and NT9010 will announce that there are zones bypassed.
When a system is armed with the [✱][9] command the system will remove the entry
delay from the system. After the exit delay, Delay 1 and Delay 2 type zones will be
instant and Stay/Away zones will remain bypassed. (see 2.3.1 Zone Definitions on
page 36). When the system is armed in this mode, the Armed light will be flashing
and NT9010 will announce that there are zones bypassed.
For more information regarding this feature, see the NT9010 User’s Guide.
[*] [0] Quick Arm
If the Quick Arm Enable option is on, the system can be armed by entering [✱][0].
This is a useful method of arming the system when someone doesn’t have an
access code.
If the Quick Arm Enable option is on, the system can be armed by entering [✱][0].
This is a useful method of arming the system when someone doesn’t have an
access code.
NOTE:
The Quick Arm feature must be enabled in order for the Stay/
Away function keys to operate as intended. If the feature is not enabled,
the user will be required to enter a valid access code after pressing the Stay
or Away function key in order to arm the system in the stay or away mode.
the user will be required to enter a valid access code after pressing the Stay
or Away function key in order to arm the system in the stay or away mode.
[*] [0] Quick Exit
Quick Exit will allow someone to leave an armed premise through a Delay type
zone without having to disarm and rearm the system.
Quick Exit will allow someone to leave an armed premise through a Delay type
zone without having to disarm and rearm the system.
When [✱][0] is entered, if the Quick Exit Enabled option is on, the system will pro-
vide a two minute window to exit. During this time the system will ignore the first
activation of a Delay type zone. When the Delay zone is secured the system will end
the two minute time period.
vide a two minute window to exit. During this time the system will ignore the first
activation of a Delay type zone. When the Delay zone is secured the system will end
the two minute time period.
If a second Delay zone is tripped, or if the zone is not restored after two minutes,
the system will start entry delay.
the system will start entry delay.
Quick Arm Enable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section [015], Option [4]
Quick Exit Enable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section [015], Option [3]
Quick Exit Enable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section [015], Option [3]