Digital Security Controls Ltd. 09GS260L User Manual
28
Option 213: GPRS Receiver 2 Address
Default (0.0.0.0)
Enter the GPRS receiver 2 IP address. This information will be provided by your central station. Note that when a valid address
has been entered, the GPRS will be considered to be enabled and will communicate events over the GPRS channel. The address
must be entered as four 3-digit entries (e.g. 192.168.1.101). Each 3-digit segment of the address must be within a valid range of
000 to 255.
has been entered, the GPRS will be considered to be enabled and will communicate events over the GPRS channel. The address
must be entered as four 3-digit entries (e.g. 192.168.1.101). Each 3-digit segment of the address must be within a valid range of
000 to 255.
Option 214: GPRS Receiver 2 Port
Default (0000)
Option 214 determines the port of GPRS receiver 2. You can set the value of this port in case your installation is located behind a
firewall, and must be assigned a particular port number as determined by your central station system administrator. Valid entries
range from 0000 to FFFF hexadecimal.
firewall, and must be assigned a particular port number as determined by your central station system administrator. Valid entries
range from 0000 to FFFF hexadecimal.
Option 215: GPRS Receiver 2 APN
Default ()
The APN (Access Point Name) identifies the GPRS network the communicator will connect to. This information is available from
your network carrier.
your network carrier.
GPRS Options
Option 221: GPRS Public APN
Default ()
When your communicator is operating on a private APN, you can use this option to switch to a public APN for DLS sessions. This
information is available from your network carrier.
See Option 215: GPRS Receiver 2 APN above for more information on APNs.
information is available from your network carrier.
See Option 215: GPRS Receiver 2 APN above for more information on APNs.
Option 222: GPRS Login User Name
Default ()
Some network carriers require you to provide login credentials when connecting to an APN. Enter your login user name here.
Option 223: GPRS Login Password
Default ()
Some network carriers require you to provide login credentials when connecting to an APN. Enter your login password here.
System Information
Option 991: Firmware Version
You can use this option to confirm the firmware version of the device.
Option 992: Ethernet IP Address