Digital Security Controls Ltd. 13WTK5504P User Manual

NOTE: For non CP-01 versions, Standard exit time is used. 
 
Instant Stay Arming (for Impassa SCW9055/57 and Alexor PC9155)
More > Functions > Arming Modes > Instant Stay Arming
Where programmed by the installer, this function key, when held down for 2 seconds, allows you to arm 

the system in Stay mode instantly. No beeps will sound and there will be no exit delay.
NOTE: This is not enabled on CP-01 listed systems.

More > Functions > Arming Modes > Instant Stay Arming
Press the key to choose the setting opposite to the one currently in use. Three beeps indicate that the 

chime is on; one long beep indicates that it is off. 

More > Functions > Quick Exit
If the system is armed and you need to exit, use the quick exit function to avoid disarming and rearming 

the system. To activate this function, press Quick Exit. The “Quick Exit in Progress” screen appears and 

the voice prompt says, “Quick exit in progress” followed by “Please exit now”. You have 2 minutes to 

leave the premises through your exit door. When the door is closed again the remaining exit time is can-

celled.

Your installer may have programmed these keys to perform other functions (reset sensors after an 

alarm, open your garage door etc.) To activate these functions, press the appropriate option. See also 

17.

Clean Mode – allows the user to touch (i.e., clean) the screen without enabling or disabling any func-

tions. The screen will remain in this mode for 30 seconds, then return to the More Functions screen.