Digital Security Controls Ltd. 13WTK5504P User Manual

User Options

Figure 9 - User Options

Access Codes

More > User Options > Access Code Programming
When Access Code Programming is selected from the User Options menu, the keypad prompts for a

Master Code. When a valid Master Code is entered, a numeric keypad is displayed with arrows to scroll

to the desired user to add/edit. Press the select button to enter the user options.

Set Access Code

– adds/edits the 4-digit code.

Prox Tag Programming

– enrolls proximity tags. (Only available on WTK5504P.)

User Options

– enables/disables different options for the user.

Delete User

– deletes the user from the system.

The access codes have programmable attributes which allow zone bypassing, remote access using the

ESCORT5580TC or one-time use activation.

Master Code (Access Code 40)

- The master code, if programmed, can only be changed by the installer.

NOTE: The master code’s attributes cannot be changed.

Supervisor Codes

- These codes can be used to program additional codes which have equal or lesser

attributes. Once programmed, the supervisor codes receive the master code’s attributes. These attributes

are changeable. Any user code can be made a supervisor code by enabling User Code Attribute 1

(please see below for details).

Duress Codes

- Duress codes are standard user codes that transmit the Duress Reporting Code to the cen-

tral station when they are entered to perform any function on the system. Any user code can be made a

duress code by enabling User Code Attribute 2 (please see below for details).
NOTE: Duress codes are not valid when entering User Options, Master Functions or Installer’s

sections.
NOTE: Access codes cannot be programmed as a duplicate or as a “Code +/- 1”. The keypad will

notify you if a duplicate code is entered. If a duplicate code is found, an error tone is given and the

code is returned to what it was before it was changed. This applies to both 4 and 6-digit codes.
User Code Attributes
1. The default attributes of a new code will be the attributes of the code used to enter User Pro-

gramming whether it is a new code or an existing code being programmed.

2. System Master Code 40 has attributes 3-4 ON by default.
NOTE: These attributes are not changeable.
Inherent Attributes (all codes except installer and maintenance)

Arm/Disarm

- Any access code will be valid for arming and disarming that partition.

Command Outputs

- If these outputs require access code entry, any Access Code will be valid for per-

forming command output functions.