Digital Security Controls Ltd. 163G4005 User Manual
30
Universal Cellular Communicator
Level 2 (Normal User): access to information about the operational status of the communicator (i.e. use of the software con-
sole in order to read the device status page and the programming options). Access level 2 may also allow access to basic
functional tests and the management of other Access level 2 users and to enabled the Installer Code. It requires a PIN
(Default value: 000000).
sole in order to read the device status page and the programming options). Access level 2 may also allow access to basic
functional tests and the management of other Access level 2 users and to enabled the Installer Code. It requires a PIN
(Default value: 000000).
Level 3 (Installer): maintenance and commissioning functions, access to affect the communicator configuration including the
addition, removal or replacement of components and other operations that directly, or indirectly, may influence the functions
of the communicator (reading/writing of the programming options via the software DLS 5 Console). It requires a PIN (Default
value: 111111).
addition, removal or replacement of components and other operations that directly, or indirectly, may influence the functions
of the communicator (reading/writing of the programming options via the software DLS 5 Console). It requires a PIN (Default
value: 111111).
Level 4 (Level 4 Installer): access to update the firmware and status page reading It requires a PIN (Default value:
222222).
222222).
See the programming page: OPTIONS.
Phonebook
The Page phonebook holds 32 telephone numbers.
The remaining balance on the pre-paid SIM card is sent via SMS to phone number #1.
Label: Enter an alphanumeric string of up to 16 characters max.
Telephone number: Enter a phone number including the country code in the format “+xxx” (e.g.: +39 for Italy). A maximum
of 16 digits is allowed (the plus sign “+” counts as a digit).
of 16 digits is allowed (the plus sign “+” counts as a digit).
The telephone numbers in the phonebook will be used for output activation, SMS dialler, Voice message dialler, IP receiver
routing and PTM.
routing and PTM.
White List: Enable or disable the White List area would allow the Communicator to accept or refuse incoming calls. The
Communicator accepts incoming calls, forwarding them to the telephone devices connected to LI terminals (such as a burglar
alarm control panel); this is possible only if LI is active as a simulated line via GSM. The functioning mode of the White List
option is linked to the selection or non-selection of the Black List, area which is present on the inside of the Options page->-
>Dialing options, as seen in the following table:
Communicator accepts incoming calls, forwarding them to the telephone devices connected to LI terminals (such as a burglar
alarm control panel); this is possible only if LI is active as a simulated line via GSM. The functioning mode of the White List
option is linked to the selection or non-selection of the Black List, area which is present on the inside of the Options page->-
>Dialing options, as seen in the following table:
Activate Output (click on [+]: select the telephone numbers which can activate the outputs T1 (OC1), T2 (OC2), T3 (OC3),
T4 (OC4), T5 (OC5) and T6 (OC6) when the Communicator receives a call from them. This function does not depend on the
White List or Black List options (Options page->Dialing options). The Calling Line Identifier service must be enabled
before the output can be activated.
T4 (OC4), T5 (OC5) and T6 (OC6) when the Communicator receives a call from them. This function does not depend on the
White List or Black List options (Options page->Dialing options). The Calling Line Identifier service must be enabled
before the output can be activated.
I To activate the output, programme the T1 (OC1), T2 (OC2), T3 (OC3), T4 (OC4), T5 (OC5) and T6 (OC6 terminals as "Output"
and enable "Reserved Output" (see pages referring to Inputs/Outputs->[+] Outputs->Reserved Output).
and enable "Reserved Output" (see pages referring to Inputs/Outputs->[+] Outputs->Reserved Output).
Output Activation Confirmation: tick this box to receive a confirmation ring once the output has been activated.
The ring will be received 1 minute after the output has been activated.
If the transmitter is already in operation (for example: the GSM channel is busy with a voice communication), the confirmation
ring will not take place.
If the transmitter is already in operation (for example: the GSM channel is busy with a voice communication), the confirmation
ring will not take place.
White List
Black List
Functioning Mode
Disabled
Disabled
Accept incoming calls from any number.
Disabled
Enabled
Refuse any incoming calls.
Enabled
Enabled
Accept incoming calls from number having an enabled White List option,
refuse call coming from all other numbers
refuse call coming from all other numbers