Digital Security Controls Ltd. 163G4005 User Manual
32
Universal Cellular Communicator
4. in the Communicator the call is forwarded to the phone number 3661730826.
If the option “Digits to remove” is enabled and a panel calls a phone number that has the “CID/SIA Conversion” enabled (see
“Phonebook”), the phone number in the “Phonebook” must match the typed by the panel (including the prefix), in this case the
communicator will carry out the conversion.
“Phonebook”), the phone number in the “Phonebook” must match the typed by the panel (including the prefix), in this case the
communicator will carry out the conversion.
Black List enabled: Check this box if you do not wish to receive calls from telephone numbers, authorising only the numbers
selected previously using the White List function (Phonebook page->White List).
selected previously using the White List function (Phonebook page->White List).
Only the “Black List” option cancels the call immediately.
When the “Black List” and “Activates Output” options are enabled, there is a delay (some seconds) before the call is cancelled;
When the Ring is selected for the “Activates Output” option, there is a delay (some seconds) before the call is cancelled; If the
output cannot be activated, the communicator cancels the call immediately.
When the “Black List” and “Activates Output” options are enabled, there is a delay (some seconds) before the call is cancelled;
When the Ring is selected for the “Activates Output” option, there is a delay (some seconds) before the call is cancelled; If the
output cannot be activated, the communicator cancels the call immediately.
Tones: Select the name of Communicator's country of installation; the selected country will establish a series of parameters
for the proper working of the simulated telephone call.
for the proper working of the simulated telephone call.
Roaming Enabled: Check this box to enable roaming.
Priorities
This page may be used to program several Communicator priorities, for the transmission of alarm events.
Dialer/LI Priority: Select the priority of telephone devices connected to the LI terminals (such as an alarm control panel).
Dialer Events Priority: Select to establish, in this field, the priority of the communicator (e.g. 1: Receiver; 2: Ring; 3: Call Digital;
4: Voice call; 5: SMS).
4: Voice call; 5: SMS).
Generic
In This section may be used to set the audio levels of the loudspeaker and microphone fitted to the GSM Communicator.
Speaker volume: The volume of the GSM loudspeaker may be adjusted by shifting the cursor.
Microphone volume: The volume of the GSM microphone may be adjusted by shifting the cursor.
If the volume on the microphone is too high, it may corrupt the DTMF tones from devices connected to the LI terminals, making
them unrecognizable.
them unrecognizable.
Enabled Antenna Cut detection: Enable this option if you want to activate the output when the antenna is missing or
shorted.
shorted.
Enabled Battery Detection: if this option is enabled it will be possible to detect faults about the connected back-up battery.
Automatic Clock Adjust
This section refers to the System.
SIM Phone Number: Enter the telephone number of the Communicator’s SIM CARD (maximum 16 digits).
Time zone: The device will be able to update the system timestamp by itself and will be programmed with the local time
zone. It will used for system clock correction in case of date time retrieved is in UTC format.
zone. It will used for system clock correction in case of date time retrieved is in UTC format.
Auto SMS: Checking this option the device will update the system date and time by sending an SMS itself.
IP Clock Adjust: Checking this option the communicator acquires the date and time from the IP receiver 1, if programmed.
To comply with the EN50136-2:2013 standards the functions “Auto SMS” and “IP Clock Adjust” must be enabled and these
functions must not be changed.
functions must not be changed.
Pay As You Go Balance
The pre-paid SIM CARD credit management service may be suspended at any time, at the discretion of each individual GSM
network operator.
network operator.
This section can be used to send an SMS providing credit balance information (supplied by the operator) to the first number in the
phonebook at regular intervals. Program the following options for a correct credit balance check request, in accordance with the
type of operator used:
phonebook at regular intervals. Program the following options for a correct credit balance check request, in accordance with the
type of operator used: