Digital Security Controls Ltd. 18LE2077 User Manual

29

NOTE: Each Ethernet/Cellular receiver must be programmed with a unique DNIS.
[203] Cellular Receiver 1 Address

Default (000.000.000.000)

Enter the Cellular Receiver 1 IP address. This information will be provided by your central station

system administrator. Each 3-digit segment of the address must be within a valid range of 000-

255.
NOTE: When a valid IP address has been entered, the Cellular is enabled and will communicate

events over the Cellular channel.

[204] Cellular Receiver 1 Port

Default (0BF5/3061)

This Section determines the port used by Cellular Receiver 1. Change the default value of this

port when your installation is located behind a firewall, and must be assigned a particular port

number as determined by your central station system administrator. Valid range: 0000 - FFFF.
NOTE: Programming this Section with 0000 will disable the receiver.
[205] Cellular Receiver 1 APN

Default (  )

The Access Point Name (APN) determines the Cellular network that the Communicator will

connect to. This information is available from your network carrier. Program this Section as 32

ASCII characters.
NOTE: When a SIM card with a custom APN is used, the unit will not have access to the Internet.

DLS and remote flash can still be done if Section [221] is programmed with a valid

Public APN.

[206] Cellular Receiver 1 Domain Name

Default (  )

i

Programming this Section is not permitted on a UL/ULC listed system.

Enter the Domain Name as 32 ASCII characters. This information will be provided by your

central station system administrator.

C

ELLULAR

 R

ECEIVER

 2 O

PTIONS

[211] Cellular Receiver 2 Account Code

Default (0000000000)

The account code is used by the central station to distinguish between different transmitters.

This account code is used when transmitting signals to the central station receiver. Signals

received on the panel will use the panel account number. Valid range: 0000000001  -

FFFFFFFFFE. 
NOTE: Programming this Section as all 0 or F will cause a Module Configuration Trouble (yellow 

LED = 12 flashes).
[212] Cellular Receiver 2 DNIS

Default (000000)

The DNIS is used in addition to the Account Code to identify the Communicator module at the

central station. Valid range: 000000 - 099999. Values are entered as a 0 followed by the 5

digit DNIS value. Format is BCD.
NOTE: Each Ethernet/Cellular receiver must be programmed with a unique DNIS.
[213] Cellular Receiver 2 Address

Default (000.000.000.000)

Enter the Cellular Receiver 2 IP address. This IP address will be provided by your central station.

Format is 4 fields, each field is 3-digit decimal. Valid range: 000 - 255.
NOTE: When a valid address has been entered, Cellular Receiver 2 is enabled and will

communicate events over the Cellular path.