Digital Monitoring Products Inc PC0181 User Manual

 

The 

Fast Program section allows you to quickly configure the essential settings 

for the XTLplus panel. When the panel programming defaults are acceptable 

for installation and only basic programming options are needed, FAST PROGRAM 

allows the installer to quickly enter information without navigating all of the 

programming menus. After choosing FAST PROGRAM, continue through the basic list 

of options.

Enter the account num ber sent to the receiver. The range of account  

numbers are 1 to 65535. For account numbers of four digits or less, you  

do not have to enter leading zeros. The panel automatically right justifies  

the account number. See Communication.

Enter the first (primary) IP address and press COMMAND. The panel displays WPS?  

NO  YES. Press the fourth select key to choose YES. Press the WPS button on the 

router. WIFI SETUP SEARCHING displays until connected to the IP address. Advance 

to APP Key. See Communication.

Enter the 8-digit App Key obtained in your Dealer Settings tab at 

dealeradmin.securecomwireless.com. See Remote Options.

This configures the panel as either a six Area system, an All/Perimeter system 

(Perimeter/Interior), or a Home/Away system (Perimeter, Interior, and Bedrooms). 

See System Options.

 Enter the number (0-23) that indicates the Greenwich Time zone (GMT) where the 

panel is located. See System Options.

Enter the zip code of the panel at this option. See System Options.

Enter the eight-digit serial number for the wireless siren. The siren is automatically 

set to Output 61. See Output Setup.

Enter the zone number to program. See Zone Information.

Press any select key to display the default zone name. To change the default zone 

name, press any select key to clear name. Enter up to 16 characters for the new 

zone name.

To change the default zone type press any select key. See Zone Information.

To change the default area, press any select key.

 

E

nter the eight digit serial number, including leading zeros, found on the  

wireless device.

When all zones are programmed, press the Back Arrow key to display FAST 

PROGRAM. Press COMMAND to display STOP and press any select key to exit the 

Fast Program function and save the programming. See Stop.
Note: All programming options are still available by reentering the  

programming menu.

FAST PROGRAM

ACCOUNT NO:

FIRST IP ADDR 
0.0.0.0

SEARCHING

APP KEY:

SYSTEM: ALL/PERIM
AREA  

A/P   H/A

HRS FROM GMT:

6

 

ENTER WEATHER 

ZIP CODE:  0 

ENTER SIREN
SERIAL#:-

ZONE NO: -

* DEFAULT NAME *

ZONE TYPE: -

AREA: -

SERIAL #: -

STOP

FIRST IP ADDR 
WPS?   NO 

YES