Digital Monitoring Products Inc PC0181 User Manual

 

(Panic 2), EM (Emergency), or EM2 (Emergency 2) is selected for a key fob Button 

Action and the button is pressed. Valid range is 51-54, 61-64, and F1-F20. For an 

output turned on by a PN, PN2, EM, or EM2 button action, the output turns off 

when any area is disarmed.

To enter an output number, press any select key followed by the output number. 

Press the COMMAND key.

This option allows you to define the output action (STD, PLS, MOM, TGL, OFF) for 

the selected output number. The default is Steady.

STD (Steady) - The output is turned on and remains on.

PLS (Pulse) - The output alternates one second on and one second off.

MOM (Momentary) - The output is turned on only once for one second.

TGL (Toggle) - The output alternates between the on state and off state. Each 

button press toggles the output state.

OFF (Off) - The output is turned off. If programmed, the output was turned on by 

some other means such as another button press, a zone action, or a schedule.

Note: When the output is assigned to PN/PN2 or EM/EM2 button action and is 

turned on, the output turns off when any area is disarmed.

When the output action is steady, pulse or toggle and the output is turned on, the 

output remains on until:

— the output cutoff time expires

— the output is reset from the keypad menu

— toggled off

The Alarm Action section allows you to change or confirm the default alarm 

characteristics of a zone type.

If you selected the non-24-hour zone type Blank, Night, Day, Exit, Auxiliary 1, or 

Auxiliary 2, the Alarm Action programming begins with Disarmed Open.

If you selected the 24-hour zone type Fire, Panic, Emergency, or Supervisory, the 

Alarm Action programming begins with Armed Open.

Defines the action taken by the panel when the zone is opened while the area is 

disarmed. There are three actions to define:

• Message to Transmit

• Output Number

• Output Action

You must also make these selections for the Disarmed Short, Armed Open, and 

Armed Short zone conditions. Press the COMMAND key to continue.

You can send two report types to the receiver: Alarm and Trouble. These are 

represented by the characters A and T. Press any select key to display the zone 

report options.

ALARM - Selecting A allows an alarm report to be sent to the receiver and the 

wireless siren output to activate according to zone type. See the Bell Action 

section. The zone name appears in the panel’s alarmed zones status lists.

TROUBLE - Selecting T allows a trouble report to be sent to the receiver and the 

zone name to appear in the panel’s alarmed zones status lists.

LOCAL - When you select L, an alarm report is NOT sent to the receiver. The bell 

output still activates according to zone type and the zone name appears in the 

panel’s alarmed zones status lists.

– (dash) - When you select – , reports are NOT sent to the receiver. The wireless 

siren output does not activate and there is no display in the panel’s alarmed zones 

status list. Only the programmed Output Number activates.

You can specify any of the outputs on the XTLplus to be activated by a zone 

ACTION:

STD   PLS  MOM  TGL

OFF

ALARM ACTION . . .

DISARMED OPEN

MSG: TROUBLE

A

T

L

-

OUTPUT NO:

0