Digital Monitoring Products Inc PC0181 User Manual
XTLplus Installation and Programming Guide
Digital Monitoring Products
47
COMPLIANCE
37.8 FCC Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part
of your body.
This device must not be collocated or operating in conjunction with any other antenna or transmitter.
This device must not be collocated or operating in conjunction with any other antenna or transmitter.
Household Burglar-Alarm System Units
ANSI/UL 1023
38.1 Bell Cutoff
The bell cutoff time cannot be less than 4 minutes.
38.2 Entry Delay
The maximum entry delay used must not be more than 45 seconds.
38.3 Exit Delay
The maximum exit delay used must not be more than 60 seconds.
38.4 Wireless External Contact
When used, the External Contact of 1101, 1102, or 1106 transmitters must be programmed Normally Closed.
38.5 Wireless Supervision Time
The Zone Information Supervision Time cannot be set to 0 (zero).
38.6 Wireless Audible Annunciation
The Wireless Audible option must be selected as DAY for residential applications.
38.7 Panel location
Mount panel inside protected area.
38.8 Test Frequency
The Test Frequency option must be programmed to send a report at least once every 30 days.
Central Station Burglar Alarm Units
ANSI/UL 1610
39.1 Supervision
Commercial Burglary is provided when the Check-in and Fail Time time is set to 3 minutes.
39.2 Remote Disarm
REMOTE DISARM must be programmed as NO.
39.3 Central Station
MESSAGE TO TRANSMIT programming for zones must not be set to LOCAL (L).