ademco 8DL6162RF User Manual
ADEMCO 6162RF Keypad / Transceiver – Installation and Setup Guide
Alphanumeric Addressable Keypad/Transceivers for use with Honeywell Control Panels; incorporates functions
of a High RF Receiver and a 5800 Transmitter module.
of a High RF Receiver and a 5800 Transmitter module.
= READY to Arm
= NOT READY to Arm
= System ARMED
= System NOT ARMED
Arming Keys
6162: 4-Line Alpha Display
Custom Zone Designators
Custom Zone Designators
6162rf-KEYPAD-LBLD-V0-032713
Programmable Function Keys
Sounder
Wall
Surface
Surface
Control Panel Terminal Strip
AUX DATA
IN
DATA
OUT
AUX
2
1
G
To Control Panel
Terminal Strip
Terminal Strip
Optional Front Cover Securing Screw
(Required in European Installations)
(Required in European Installations)
Install Four (4)
Mounting Screws
Mounting Screws
Control Panel
1. OPEN
Keypad
Front Cover
Front Cover
2. WIRE
3. MOUNT
• Connect only one wire per terminal.
• For Daisy-Chain Configurations, use
wire splicing so only one wire is
connected to each terminal.
• For Daisy-Chain Configurations, use
wire splicing so only one wire is
connected to each terminal.
• Mount on drywall, or in
a single or double-gang
electrical box.
a single or double-gang
electrical box.
6162RF-installation-3-21-13
Black (Gnd)
Red (+12vdc)
Green (Data To Control)
Yellow (Data From Control)
Red (+12vdc)
Green (Data To Control)
Yellow (Data From Control)
To activate Function keys,
press and hold key for at
least 2 seconds; key pairs
are activated immediately.
press and hold key for at
least 2 seconds; key pairs
are activated immediately.
Table 1 – Programmable
Function Keys
Function Keys
A or
and
B or
and
C or
and
D
Note: See the control's instructions for
details on programming the Function
keys for panic alarms or other special
functions (i.e., macros).
details on programming the Function
keys for panic alarms or other special
functions (i.e., macros).
• Supports wireless key transmitters
(e.g., 5834-4) and bi-directional
transmitters (e.g.; 5804BD,
5828/5828V).
transmitters (e.g.; 5804BD,
5828/5828V).
• Supports wireless keys with high-
security (encryption) capability (e.g.;
5834-4).
5834-4).
• Provides a nominal range of 200
feet for RF transmitters (some
transmitters have a shorter range).
transmitters have a shorter range).
• Supports RF jam detection.
Table 3 – Icon Descriptions
ICON DESCRIPTION
TEST SYSTEM
BYPASS ZONES
BYPASS ZONES
ASSIGN CODES
CHIME MODE
CHIME MODE
ARM MAXIMUM
ARM INSTANT
ARM AWAY
ARM NIGHT STAY
DISARM
ARM STAY
SETTINGS
Table 2 – Settings Key
Settings Key
Result
Press
Displays Settings Menu*:
1 Set Time/Date
2 View Event Log
3 Reboot Keypad
4 Set User Code**
1 Set Time/Date
2 View Event Log
3 Reboot Keypad
4 Set User Code**
*
Follow instructions in the User Guide for these options; selecting
option 3 reboots the 6162 keypad.
option 3 reboots the 6162 keypad.
**
Set User Code option available only with the following Control
Panels: VISTA-10P Rev 4.16, VISTA-15P Rev 9.16, VISTA-
20P Rev 9.16 and VISTA-21iP Rev 3.16.
20P Rev 9.16 and VISTA-21iP Rev 3.16.
GO TO PAGE 4
FOR FCC / IC
INFORMATION