Biolog-id SSTABIOLOGID User Manual
Smart Storage Agitator User Manual
Version: 1.0
Validation date of the manual: 18/09/2018
23 of 27
To clean and maintain the proper functioning of the SST-A, we advise you to follow the
instructions below.
instructions below.
Before each cleaning, make sure to put the SST-A in maintenance mode (see
GUI manual).
GUI manual).
Risks of material damage caused by the use of unsuitable cleaning utensils,
high-pressure cleaner or water spray or under pressure.
high-pressure cleaner or water spray or under pressure.
Do not use cleaning products containing:
-Acids and halogenated compounds (chlorides, bromides, iodides)
-Strongly acidic salts, e.g. descaler based on formic acid and amino sulfonic
acid.
- Pipeline stripper, hydrochloric acid, silver cleaner.
- Chlorine.
- Abrasive and scouring components (scouring powder, steel wool)
- Polishing products, waxes, bleaching agents.
-Strongly acidic salts, e.g. descaler based on formic acid and amino sulfonic
acid.
- Pipeline stripper, hydrochloric acid, silver cleaner.
- Chlorine.
- Abrasive and scouring components (scouring powder, steel wool)
- Polishing products, waxes, bleaching agents.
It is imperative to observe the instructions of the manufacturer of the cleaning
agent used with regard to temperature, dosage, time of action, etc.
agent used with regard to temperature, dosage, time of action, etc.
After all the cleaning operations: verify that the unit is operational.